PCB Configuration:
?
Choose whether PCB is bare or assembled.
Bare PCB
Assembled PCB
Upload BOM (.zip/.rar):
Upload Pick & Place File (.zip/.rar):
Accept Alternate Part?
Board Type
?
PCBs will be shipped in single pieces or in panel. For bulk assembly orders (quantity greater than 30), we recommend shipping in panel, which will improve the assembly efficiency.
:
Single Pieces
Panel By Customer
Material
?
FR4 is the most common arade dielectric material that is used in the fabrication of circu boards. Aluminum boards have better heat dissipation and thermal transfer than standard FR-4 constructions. The copper base boards have a great thermal conductivity better than aluminum PCB. Due to its characteristics of low dielectric loss, Rogers is often used in high-frequency PCB. If you need other materials, please contact your sales representative.
:
FR4
ALUMINIUM
FLEXIBLE BOARDS
ROGERS
HDI
COPPER
RIGID-FLEX BOARDS
TG Rating
?
Glass transition temperature rating.
:
TG130-140
TG150-160
TG170-180
Thermal Conductivity (W/m·K):
1.0
1.5
2.0
2.5
Rogers Material Type:
RO4350B
RO4003C
RT5880
Number of Layers
?
The number of copper layers in the board. PCBWay can currently produce up to 60 layers, if you need more than 14 layers, please select the advanced PCB page for valuation.
:
1
2
4
6
8
10
12
14
16
18
20
PCB Dimension (mm)
?
The board size refers to the length and width of the board ordered by the customer. If it is a circular board, the length and width are the diameter of the circle; If it is a board with irregular shape, the length and width are measured according to the largest shape range.
:
Width:
Height:
If PCB is circular then diameter (mm):
Quantity:
PCB Thickness (mm)
?
For ordinary materials, the board thickness refers to the thickness of the PCB after production is complete, and the error is about 10% (+/-10% (T>=1mm) or +/- 0.1mm (T<1mm).). The error is mainly caused by solder mask and copper sinking. If there are other requirements for thickness error, please make a note in Other Special Requirements. Note: For single sided/double sided Rogers board, the thickness refers to thickness of substrate.
:
0.60
0.80
1.00
1.20
1.60
2.00
2.40
3.00
Solder Mask Color:
Green
Red
Yellow
Blue
White
Black
Matte Black
Silk Screen Color:
White
Surface Finish:
HASL
HASL Lead Free
ENIG
OSP
AG
IMMERSION TIN
NONE/PLAIN COPPER
HASL WITH LEAD
Via Process:
TENTING VIAS
PLUGGED VIAS WITH SOLDER MASK
VIAS NOT COVERED
IPC Class:
CLASS I
CLASS II
CLASS III
Outer Copper Weight:
1oz.
2oz.
Inner Copper:
0.5oz.
1oz.
2oz.
Min Drill Hole Size:
0.2 mm
0.25 mm
0.3 mm
Castellated Holes:
Yes
No
Trace Width / Spacing:
4/4 mil
5/5 mil
6/6 mil
8/8 mil
10/10 mil
Impedance Control:
Yes
No
Upload Gerber File:
Is Stencil Required?
Yes
No
Stencil Remarks / Instructions:
Remarks / Special Requests:
Order Summary
Submit PCB
